HP Sprout Pro G2 Maintenance & Service Guide - Page 62
Speakers
View all HP Sprout Pro G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Speakers Speakers are located on both sides of the computer. Each speaker is secured by five Torx screws. To remove the speakers: 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 23). 2. Remove the rear covers (see Removing the rear covers from the computer on page 24). 3. Remove the memory cover (see Memory on page 29). 4. Separate the computer from the column (see Separating the computer from the column on page 41). 5. Remove the M.2 cover (see M.2 cover and solid-state drive on page 33). 6. Remove the system board cover (see System board cover on page 43). 7. Remove five Torx screws (1) that secure the right speaker (left when viewed from behind) to the computer. 8. Remove the speaker cable from its routing path, and then disconnect the cable from the system board (2). 9. Remove the five Torx screws (1) that secure the left speaker to the computer. 52 Chapter 4 Removal and Replacement Procedures