Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 106

Web Management User Guide 3. Use VLAN ID to select the VLAN ID. It can be any number in the range of 1 to 4093. All the ports in the group will assign this VLAN ID to untagged packets received for the protocols you included in this group. 4. Click ADD to add a new Protocol Based VLAN group to the switch. 5. Click DELETE to remove the Protocol Based VLAN group identified by the value in the Group ID field. Field Group ID Ports Description A number used to identify the group created by the user. Group IDs are automatically assigned when a group is created by the user. Display all the member ports which belong to the group. Protocol Based VLAN Group Membership To display the Protocol Based VLAN Group Membership page, click Switching VLAN  Advanced  Protocol Based VLAN Group Membership. 1. Use Group ID to select the protocol-based VLAN Group ID for which you want to display or configure data. 2. Use Port List to add the ports you selected to this Protocol Based VLAN Group. Note that a given interface can only belong to one group for a given protocol. If you have already added a port to a group for IP, you cannot add it to another group that also includes IP, although you could add it to a new group for IPX. Field Group Name Current Members Description This field identifies the name for the protocol-based VLAN you selected. It can be up to 32 alphanumeric characters long, including blanks. This button can be click to show the current numbers in the selected protocol based VLAN Group. 106