Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 283
Dynamic ARP Inspection, DAI Configuration
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 283 highlights
Web Management User Guide Dynamic ARP Inspection The Dynamic ARP Inspection (DAI) folder contains links to the following features: • DAI Configuration on page 283 • DAI VLAN Configuration on page 283 • DAI Interface Configuration on page 285 • DAI ACL Configuration on page 285 • DAI ACL Rule Configuration on page 286 • DAI Statistics on page 286 DAI Configuration To display the DAI Configuration page, click Security Control> Dynamic ARP Inspection DAI Configuration. 1. Use Validate Source MAC to choose the DAI Source MAC Validation Mode for the switch by selecting Enable or Disable radio button. If you select Enable, Sender MAC validation for the ARP packets will be enabled. The factory default is disable. 2. Use Validate Destination MAC to choose the DAI Destination MAC Validation Mode for the switch by selecting Enable or Disable radio button. If you select Enable, Destination MAC validation for the ARP Response packets will be enabled. The factory default is disable. 3. Use Validate IP to choose the DAI IP Validation Mode for the switch by selecting Enable or Disable radio button. If you select Enable, IP Address validation for the ARP packets will be enabled. The factory default is disable. DAI VLAN Configuration To display the DAI VLAN Configuration page, click Security Control> Dynamic ARP Inspection DAI VLAN Configuration. 283