Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 64

Web Management User Guide 1. Enter the Port in slot/port format and click Go. The entry corresponding to the specified Port, will be selected. The following table describes the PoE PD Port Status non-configurable fields. Field Port Mode Class Detection Mode Status Description The interface for which data is to be displayed. The Mode is PD always. The class of the Powered Device (PD) defines the range of power a PD is drawing from the system. Class definitions: 0 - 0.44-16.2(watts) 1 - 0.44-4.2(watts) 2 - 0.44-7.4(watts) 3 - 0.44-16.2(watts) 4 - 0.44-31.2(watts) Power Device (PD) device class is always 4. Displays the Power Device (PD) Detection Mode. Displays the Power Device (PD) Powered Status. 2. Click REFRESH to refreshes the web page to show the latest PoE PD Port Status. SNMP From SNMP link under the System tab, you can configure SNMP settings for SNMP V1/V2 and SNMPv3. From the SNMP link, you can access the following pages: • SNMPV1/V2 on page 64 • SNMP V3 on page 70 SNMPV1/V2 The pages under the SNMPV1/V2 menu allow you to configure SNMP community information, traps, and trap flags. From the SNMP V1/V2 link, you can access the following pages: • Community Configuration on page 65 • Trap Configuration on page 66 • Trap Flags on page 68 • Supported MIBs on page 69 64