Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 132
IGMP Snooping Interface Configuration, Switching, Multicast, IGMP Snooping, Interface Configuration
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Web Management User Guide IGMP Snooping Interface Configuration Use the IGMP Snooping Interface Configuration page to configure IGMP snooping settings on specific interfaces. To access the IGMP Snooping Interface Configuration page, click Switching Multicast IGMP Snooping Interface Configuration. To configure IGMP Snooping interface settings: 1. Interface: Lists all physical, VLAN, and LAG interfaces. Select the interface you want to configure. 2. Use Admin Mode to select the interface mode for the selected interface for IGMP Snooping for the switch from the pull-down menu. The default is disable. 3. Use Group Membership Interval to specify the amount of time you want the switch to wait for a report for a particular group on a particular interface before it deletes that interface from the group. Enter a value between 1 and 3600 seconds. The default is 260 seconds. 4. Use Max Response Time to specify the amount of time you want the switch to wait after sending a query on an interface because it did not receive a report for a particular group on that interface. Enter a value greater or equal to 1 and less than the Group Membership Interval in seconds. The default is 10 seconds. The configured value must be less than the Group Membership Interval. 132