Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 277
DHCP Snooping Interface Configuration, Logging Invalid Packets
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
Web Management User Guide DHCP Snooping Interface Configuration To display the DHCP Snooping Interface Configuration page, click Security Control> DHCP Snooping Interface Configuration. 1. Interface - Selects the interface for which data is to be configured. 2. If Trust Mode is enabled, DHCP snooping application considers as port trusted. The factory default is disabled. 3. If Logging Invalid Packets is enabled, DHCP snooping application logs invalid packets on this interface. The factory default is disabled. 4. Use Rate Limit(pps) to specify rate limit value for DHCP Snooping purpose. If the incoming rate of DHCP packets exceeds the value of this object for consecutively burst interval seconds, the port will be shutdown. If this value is None there is no limit. The factory default is 15pps (packets per second). The range of Rate Limit is (0 to 300). 5. Use Burst Interval(secs) to specify the burst interval value for rate limiting purpose on this interface. If the rate limit is None burst interval has no meaning shows it as N/A. The factory default is 1 second. The range of Burst Interval is 1 to 15). DHCP Snooping Binding Configuration To display the DHCP Snooping Binding Configuration page, click Security Control> DHCP Snooping Binding Configuration. 277