Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 88
Advanced, Global Configuration, Interface Configuration, ISDP Neighbor, ISDP Statistics
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Web Management User Guide 1. Use Admin Mode to specify whether the ISDP Service is to be Enabled or Disabled. The default value is Enabled. 2. Use Timer to specify the period of time between sending new ISDP packets. The range is 5 to 254 seconds. Default value is 30 seconds. 3. Use Hold Time to specify the hold time for ISDP packets that the switch transmits. The hold time specifies how long a receiving device should store information sent in the ISDP packet before discarding it. The range 10 to 255 seconds. Default value is 180 seconds. 4. Use Version 2 Advertisements to enable or disable the sending of ISDP version 2 packets from the device. The default value is Enabled. The following table describes the ISDP Basic Global Configuration fields. Field Neighbors table last time changed Device ID Device ID format capability Device ID format Description Specifies if Displays the device ID of this switch. Displays the device ID format capability. Displays the device ID format. Advanced From the Advanced link, you can access the following pages: • Global Configuration on page 89 • Interface Configuration on page 90 • ISDP Neighbor on page 90 • ISDP Statistics on page 91 88