Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 144
MLD Snooping Querier Configuration, Querier Expiry Intervalsecs
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Web Management User Guide 3. Use Multicast Router to enable or disable the multicast router for the Vlan ID. MLD Snooping Querier Configuration Use this menu to configure the parameters for MLD Snooping Querier. Note that only a user with Read/Write access privileges may change the data on this screen. To access the MLD Snooping Querier Configuration page, click Switching Multicast MLD Snooping Querier Configuration. 1. Use Querier Admin Mode to select the administrative mode for MLD Snooping for the switch. The default is disable. 2. Use Querier Address to specify the Snooping Querier Address to be used as source address in periodic MLD queries. This address is used when no address is configured on the VLAN on which query is being sent. The supported IPv6 formats are x:x:x:x:x:x:x:x and x::x. 3. Use MLD Version to specify the MLD protocol version used in periodic MLD queries. MLD queries. 4. Use Query Interval(secs) to specify the time interval in seconds between periodic queries sent by the snooping querier. The Query Interval must be a value in the range of 1 and 1800. The default value is 60. 5. Use Querier Expiry Interval(secs) to specify the time interval in seconds after which the last querier information is removed. The Querier Expiry Interval must be a value in the range of 60 and 300. The default value is 60. Field VLAN Ids Enabled For MLD Snooping Querier Description Displays VLAN Ids enabled for MLD snooping querier. MLD Snooping Querier VLAN Configuration To access the MLD Snooping Querier VLAN Configuration page, click Switching Multicast MLD Snooping Querier VLAN Configuration. 144