Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 138
IGMP Snooping Querier VLAN Configuration, Snooping Querier VLAN Address
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Web Management User Guide IGMP Snooping Querier VLAN Configuration Use this page to configure IGMP queriers for use with VLANs on the network. To access this page, click Switching Multicast IGMP Snooping Querier VLAN Configuration. To configure Querier VLAN settings: 1. To create a new VLAN ID for IGMP Snooping, select New Entry from the VLAN ID field and complete the following fields. User can also set pre-configurable Snooping Querier parameters. • VLAN ID - Specifies the VLAN ID for which the IGMP Snooping Querier is to be enabled. • Querier Election Participate Mode - Enable or disable Querier Participate Mode. • Disabled - Upon seeing another querier of the same version in the VLAN, the snooping querier moves to the non-querier state. • Enabled - The snooping querier participates in querier election, in which the least IP address operates as the querier in that VLAN. The other querier moves to non-querier state. • Snooping Querier VLAN Address - Specify the Snooping Querier IP Address to be used as the source address in periodic IGMP queries sent on the specified VLAN. 2. Click APPLY to apply the new settings to the switch. Configuration changes take effect immediately 3. To disable Snooping Querier on a VLAN, select the VLAN ID and click DELETE. 4. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 5. Click REFRESH to update the page with the latest information from the switch. 138