Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 147
MVR Configuration, Basic, Switching, MVR Running, Enable, Disable, MVR multicast
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Web Management User Guide MVR Configuration From the MVR Configuration link under the Switching tab, you can configure the MVR settings. From the MVR Configuration link, you can access the following pages: • Basic on page 147 • Advanced on page 148 Basic From the Basic link, you can access the following pages: • MVR Configuration on page 147 MVR Configuration To display the MVR Configuration page, click Switching > MVR > Basic > MVR Configuration. A screen similar to the following displays. 1. Use MVR Running to Enable or Disable the MVR feature. The factory default is Disable. 2. Use MVR multicast to specify the VLAN on which MVR multicast data will be received. All source ports belong to this VLAN. The value can be set in a range of 1 to 4093. The default value is 1. Field Definition MVR Max Multicast Groups Displays the maximum number of multicast groups that MVR supports. MVR Current Multicast Groups Displays current number of the MVR groups allocated. 3. Use MVR Global query response time to set the maximum time to wait for the IGMP reports membership on a receiver port. This time applies only to receiver-port leave 147