Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 27
Network Interface, IPv4 Network Configuration
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Web Management User Guide Network Interface From the Network Interface link, you can access the following pages: • IPv4 Network Configuration on page 27 • IPv6 Network Interface Configuration on page 29 • IPv6 Network Interface Neighbor Table on page 30 IPv4 Network Configuration To display the IPv4 Network Configuration page, click System > Management > Network Interface > IPv4 Network Configuration. A screen similar to the following displays. The network interface is the logical interface used for in-band connectivity with the switch via any of the switch's front panel ports. The configuration parameters associated with the switch's network interface do not affect the configuration of the front panel ports through which traffic is switched or routed To access the switch over a network you must first configure it with IP information (IP address, subnet mask, and default gateway). You can configure the IP information using any of the following: • BOOTP • DHCP • Terminal interface via the EIA-232 port 27