Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 191
ARP Static Configuration, ARP Cache, IP Address, DELETE, APPLY, REFRESH
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Web Management User Guide ARP Static Configuration Use this screen to add an entry to the Address Resolution Protocol table. 1. Use IP Address to enter the IP address you want to add. It must be the IP address of a device on a subnet attached to one of the switch's existing routing interfaces. 2. Use MAC Address to specify the unicast MAC address of the device. Enter the address as six two-digit hexadecimal numbers separated by colons, for example 00:06:29:32:81:40. 3. Click ADD to add a new static ARP entry to the switch. 4. Click DELETE to delete an existing static ARP entry from the switch. 5. Click APPLY to change the MAC Address mapping to the IP. Configuration changes take effect immediately. ARP Cache Use this screen to show ARP entries in the ARP Cache. Field Description Port The associated Unit/Slot/Port of the connection IP Address Displays the IP address. It must be the IP address of a device on a subnet attached to one of the switch's existing routing interfaces. MAC Address The unicast MAC address of the device. The address is six two-digit hexadecimal numbers separated by colons, for example 00:06:29:32:81:40. Click REFRESH to show the latest IP information. 191