Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 40

Web Management User Guide 3. Click ADD. The entry appears in the list below. 4. To remove an entry from the static DNS table, select the check box next to the entry and click DELETE. 5. To change the hostname or IP address in an entry, select the check box next to the entry and enter the new information in the appropriate field, and then click APPLY. 6. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. The Dynamic Host Mapping table shows host name-to-IP address entries that the switch has learned. The following table describes the dynamic host fields. Field Host Total Elapsed Type Addresses Description Lists the host name you assign to the specified IP address. Amount of time since the dynamic entry was first added to the table. Amount of time since the dynamic entry was last updated. The type of the dynamic entry. Lists the IP address associated with the host name. SDM Template Preference You can use this page to configure SDM template preferences for the switch. To access this page, click System  Management  DNS  SDM Template Preference. To configure the SDM Template Preference settings: 1. Use SDM Next Template ID to configure the next active template. It will be active only after the next reboot. To revert to the default template after the next reboot, use the Default option. Possible values are: • Default • Dual IPv4 and IPv6 • IPv4-routing Default • IPv4 Data Center 40