Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 324
Command Log Configuration, Monitoring, Logs > Command Log, Configuration, Admin Mode
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 324 highlights
Web Management User Guide Command Log Configuration To access the Command Log Configuration page, click Monitoring Logs > Command Log Configuration. 1. Use Admin Mode to enable/disable the operation of the CLI Command logging by selecting the corresponding radio button. Console Log Configuration This allows logging to any serial device attached to the host. To access the Console Log Configuration page, click Monitoring Logs > Console Log Configuration. 1. A log that is "Disabled" shall not log messages. A log that is "Enabled" shall log messages. Enable or Disable logging by selecting the corresponding radio button. 2. Severity Filter. A log records messages equal to or above a configured severity threshold. Select the severity option by selecting the corresponding line on the pull-down entry field. These severity levels have been enumerated below: • Emergency (0) - system is unusable • Alert (1) - action must be taken immediately • Critical (2) - critical conditions • Error (3) - error conditions • Warning (4) - warning conditions • Notice(5) - normal but significant conditions • Informational(6) - informational messages • Debug(7) - debug-level messages 324