Home » Netgear Manuals » Hubs & Switches » Netgear GSM7212P » Manual Viewer

Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 133

IGMP VLAN Configuration, Multicast Router Expiry Time

Add to My Manuals
Save this manual to your list of manuals

Page 133 highlights

Web Management User Guide 5. Use Present Expiration Time to specify the amount of time you want the switch to wait to receive a query on an interface before removing it from the list of interfaces with multicast routers attached. Enter a value between 0 and 3600 seconds. The default is 0 seconds. A value of zero indicates an infinite time-out, i.e. no expiration. 6. Use Fast Leave Admin mode to select the Fast Leave mode for the a particular interface from the pull-down menu. The default is disable. 7. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 8. If you make any configuration changes, click APPLY to apply the new settings to the switch. Configuration changes take effect immediately. IGMP VLAN Configuration Use the IGMP Snooping VLAN Configuration page to configure IGMP snooping settings for VLANs on the system. To access the IGMP Snooping VLAN Configuration page, click Switching Multicast  IGMP Snooping  IGMP VLAN Configuration. To configure IGMP snooping settings for VLANs: 1. To enable IGMP snooping on a VLAN, enter the VLAN ID in the appropriate field and configure the IGMP Snooping values: • Use Admin Mode to enable or disable IGMP Snooping for the specified VLAN ID. • Use Fast Leave Admin Mode to enable or disable the IGMP Snooping Fast Leave Mode for the specified VLAN ID. • Use Group Membership Interval to set the value for group membership interval of IGMP Snooping for the specified VLAN ID. Valid range is (Maximum Response Time + 1) to 3600 seconds. • Use Maximum Response Time to set the value for maximum response time of IGMP Snooping for the specified VLAN ID. Valid range is 1 to (Group Membership Interval 1). Its value should be greater than group membership interval value. • Use Multicast Router Expiry Time to set the value for multicast router expiry time of IGMP Snooping for the specified VLAN ID. Valid range is 0 to 3600 seconds. 2. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 133

Section	Page
ProSafe® Managed Switch	1
Contents	3
1. Getting Started	8
Switch Management Interface	8
Web Access	8
Understanding the User Interfaces	9
Using the Web Interface	9
Using SNMP	14
Interface Naming Convention	14
2. Configuring System Information	16
Management	16
System Information	16
Switch Statistics	21
System CPU Status	24
Loopback Interface	26
Network Interface	27
Time	31
DNS	38
SDM Template Preference	40
Services	42
DHCP Server	42
DHCP Relay	51
DHCP L2 Relay	52
UDP Relay	55
PoE	57
Basic	57
Advanced	59
SNMP	64
SNMPV1/V2	64
SNMP V3	70
LLDP	71
LLDP	72
LLDP-MED	78
ISDP	87
Basic	87
Advanced	88
Timer Schedule	93
Timer Global Configuration	93
Timer Schedule Configuration	94
3. Configuring Switching Information	96
VLANs	96
Basic	97
Advanced	99
Spanning Tree Protocol	112
Basic	112
Advanced	115
Multicast	127
MFDB	127
IGMP Snooping	129
MLD Snooping	140
MVR Configuration	147
Basic	147
Advanced	148
Address Table	152
Basic	152
Advanced	154
Ports	158
Port Configuration	158
Port Description	160
Link Aggregation Groups	161
LAG Configuration	162
LAG Membership	163
4. Routing	166
Routing Table	166
Basic	167
Advanced	169
IP	171
Basic	171
Advanced	178
VLAN	186
VLAN Routing Wizard	187
VLAN Routing Configuration	188
ARP	189
Basic	189
Advanced	190
Router Discovery	193
5. Configuring Quality of Service	196
Class of Service	197
Basic	197
Advanced	199
Differentiated Services	204
DiffServ Wizard	205
Auto VoIP Configuration	207
Basic	207
Advanced	209
6. Managing Device Security	224
Management Security Settings	224
Local User	224
Enable Password Configuration	227
Line Password Configuration	227
RADIUS	228
Configuring TACACS+	234
Authentication List Configuration	236
Login Sessions	240
Configuring Management Access	241
HTTP	241
HTTPS	243
SSH	246
Telnet	249
Console Port	251
Denial of Service	252
Port Authentication	253
Basic	254
Advanced	255
Traffic Control	262
MAC Filter	263
Port Security	265
Private Group	270
Protected Ports Configuration	272
Storm Control	273
Control	275
DHCP Snooping	275
IP Source Guard	281
Dynamic ARP Inspection	283
Configuring Access Control Lists	288
ACL Wizard	288
Basic	289
Advanced	294
7. Monitoring the System	308
Ports	308
Port Statistics	309
Port Detailed Statistics	311
EAP Statistics	317
Cable Test	320
Logs	321
Buffered Logs	322
Command Log Configuration	324
Console Log Configuration	324
SysLog Configuration	325
Trap Logs	326
Event Logs	328
Persistent Logs	329
Port Mirroring	330
Multiple Port Mirroring	330
sFlow	332
Basic	332
Advanced	333
8. Maintenance	336
Save Configuration	336
Save Configuration	336
Auto Install Configuration	337
Reset	337
Device Reboot	338
Factory Default	338
Password Reset	339
Upload File From Switch	339
File Upload	340
HTTP File Upload	341
USB File Upload	342
Download File To Switch	342
File Download	343
HTTP File Download	344
USB File Download	346
File Management	347
Copy	347
Dual Image Configuration	348
Troubleshooting	349
Ping IPv4	349
Ping IPv6	350
Traceroute IPv4	351
Traceroute IPv6	352
9. Help	354
Online Help	354
Support	354
User Guide	355
A. Default Settings	357
B. Configuration Examples	361
Virtual Local Area Networks (VLANs)	361
VLAN Example Configuration	362
Access Control Lists (ACLs)	363
MAC ACL Example Configuration	364
Standard IP ACL Example Configuration	365
Differentiated Services (DiffServ)	366
Class	366
DiffServ Traffic Classes	367
Creating Policies	367
DiffServ Example Configuration	368
802.1X	370
802.1X Example Configuration	371
MSTP	372
MSTP Example Configuration	374
C. Notification of Compliance	378

Match case Limit results 1 per page

133

Web Management User Guide

Use

Present Expiration Time

to specify the amount of time you want the switch to wait to

receive a query on an interface before removing it from the list of interfaces with multicast

routers attached. Enter a value between 0 and 3600 seconds. The default is 0 seconds. A

value of zero indicates an infinite time-out, i.e. no expiration.

Use

Fast Leave Admin

mode to select the Fast Leave mode for the a particular interface

from the pull-down menu. The default is disable.

Click

CANCEL

to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.

If you make any configuration changes, click

APPLY

to apply the new settings to the switch.

Configuration changes take effect immediately.

IGMP VLAN Configuration

Use the IGMP Snooping VLAN Configuration page to configure IGMP snooping settings for

VLANs on the system.

To access the IGMP Snooping VLAN Configuration page, click

Switching



Multicast



IGMP

Snooping



IGMP VLAN Configuration

To configure IGMP snooping settings for VLANs:

To enable IGMP snooping on a VLAN, enter the VLAN ID in the appropriate field and

configure the IGMP Snooping values:

•

Use

Admin Mode

to enable or disable IGMP Snooping for the specified VLAN ID.

•

Use

Fast Leave Admin Mode

to enable or disable the IGMP Snooping Fast Leave

Mode for the specified VLAN ID.

•

Use

Group Membership Interval

to set the value for group membership interval of

IGMP Snooping for the specified VLAN ID. Valid range is (Maximum Response Time

+ 1) to 3600 seconds.

•

Use

Maximum Response Time

to set the value for maximum response time of IGMP

Snooping for the specified VLAN ID. Valid range is 1 to (Group Membership Interval -

1). Its value should be greater than group membership interval value.

•

Use

Multicast Router Expiry Time

to set the value for multicast router expiry time of

IGMP Snooping for the specified VLAN ID. Valid range is 0 to 3600 seconds.

Click

CANCEL

to cancel the configuration on the screen and reset the data on the screen to

the latest value of the switch.