Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 276
DHCP Snooping Configuration, DHCP Snooping Mode, MAC Address Validation, VLAN ID, APPLY
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
Web Management User Guide DHCP Snooping Configuration 1. Use DHCP Snooping Mode to enable or disable the DHCP Snooping feature. The factory default is disabled. 2. Use MAC Address Validation to enable or disable the validation of sender MAC Address for DHCP Snooping. The factory default is enabled. DHCP Snooping VLAN Configuration 1. Use VLAN ID to enter the VLAN for which the DHCP Snooping Mode is to be enabled. 2. Use DHCP Snooping Mode to enable or disable the DHCP Snooping feature for entered VLAN. The factory default is disabled. 3. Click APPLY to apply the new configuration and cause the changes to take effect. These changes will not be retained across a power cycle unless a save configuration is performed. 276
276
Web Management User Guide
DHCP Snooping Configuration
1.
Use
DHCP Snooping Mode
to enable or disable the DHCP Snooping feature. The
factory default is disabled.
2.
Use
MAC Address Validation
to enable or disable the validation of sender MAC Address
for DHCP Snooping. The factory default is enabled.
DHCP Snooping VLAN Configuration
1.
Use
VLAN ID
to enter the VLAN for which the DHCP Snooping Mode is to be enabled.
2.
Use
DHCP Snooping Mode
to enable or disable the DHCP Snooping feature for entered
VLAN. The factory default is disabled.
3.
Click
APPLY
to apply the new configuration and cause the changes to take effect. These
changes will not be retained across a power cycle unless a save configuration is performed.