Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 141
MLD Snooping Interface Configuration, Switching, Multicast, MLD Snooping, Interface Configuration
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Web Management User Guide MLD Snooping Interface Configuration To access the MLD Snooping Interface Configuration page, click Switching Multicast MLD Snooping Interface Configuration. 1. Interface - Displays all physical, VLAN, and LAG interfaces. Select the interface you want to configure. 2. Use Admin Mode to select the interface mode for the selected interface for MLD Snooping for the switch. The default is disable. 3. Use Group Membership Interval(secs) to specify the amount of time you want the switch to wait for a report for a particular group on a particular interface before it deletes that interface from the group. The valid range is from (2 to 3600) seconds. The configured value must be greater than Max Response Time. The default is 260 seconds. 4. Use Max Response Time(secs) to specify the amount of time you want the switch to wait after sending a query on an interface because it did not receive a report for a particular group on that interface. Enter a value greater or equal to 1 and less than the Group Membership Interval in seconds. The default is 10 seconds. The configured value must be less than the Group Membership Interval. 141