Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 304

Web Management User Guide user, a sequence number that is one greater than the highest sequence number currently in use for this interface and direction will be used. The valid range is 1-4294967295. 3. Click the appropriate orange bar to expose the available ports or LAGs. The Port Selection Table specifies list of all available valid interfaces for ACL mapping. All non-routing physical interfaces and interfaces participating in LAGs are listed. • To add the selected ACL to a port or LAG, click the box directly below the port or LAG number so that an X appears in the box. • To remove the selected ACL from a port or LAG, click the box directly below the port or LAG number to clear the selection. An X in the box indicates that the ACL is applied to the interface. 4. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 5. Click APPLY to save any changes to the running configuration. Field Interface Direction ACL Type ACL ID/Name Sequence Number Description Displays selected interface. Displays selected packet filtering direction for ACL. Displays the type of ACL assigned to selected interface and direction. Displays the ACL Number (in the case of IP ACL) or ACL Name (in the case of named IP ACL and IPv6 ACL) identifying the ACL assigned to selected interface and direction. Displays the Sequence Number signifying the order of specified ACL relative to other ACLs assigned to selected interface and direction. IP Binding Table Use the IP Binding Table page to view or delete the IP ACL bindings. To display the IP Binding Table, click Security  ACL> Advanced  Binding Table. The following table describes the information displayed in the IP ACL Binding Table. To delete an IP ACL-to-interface binding, select the check box next to the interface and click DELETE. 304