Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 202
CoS Interface Configuration, CoS> Advanced > CoS, Interface, Interface Trust Mode
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Web Management User Guide CoS Interface Configuration Use the CoS Interface Configuration page to apply an interface shaping rate to all interfaces or to a specific interface. To display the CoS Interface Configuration page, click QoS CoS> Advanced > CoS Interface Configuration. To configure CoS settings for an interface: 1. Use Interface to specify all CoS configurable interfaces. 2. Use Interface Trust Mode to specify whether to trust a particular packet marking at ingress. Interface Trust Mode can only be one of the following. Default value is trust dot1p. • untrusted • trust dot1p • trust ip-dscp 3. Use Interface Shaping Rate to specify the maximum bandwidth allowed, typically used to shape the outbound transmission rate. This value is controlled independently of any per-queue maximum bandwidth configuration. It is effectively a second-level shaping mechanism. Default value is 0. Valid Range is 0 to 100 in increments of 1. The value 0 means maximum is unlimited. 4. Click CANCEL to cancel the configuration on the screen. Resets the data on the screen to the latest value of the switch. 202