Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 254
Basic, Port Based Authentication State
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
Web Management User Guide Basic From the Basic link, you can access the following pages: • 802.1X Configuration on page 254 802.1X Configuration Use the 802.1X Configuration page to enable or disable port access control on the system. To display the 802.1X Configuration page, click Security Port Authentication Basic 802.1X Configuration. To configure global 802.1X settings: 1. Select the appropriate radio button in the Port Based Authentication State field to enable or disable 802.1X administrative mode on the switch. • Enable. Port-based authentication is permitted on the switch. Note: If 802.1X is enabled, authentication is performed by a RADIUS server. This means the primary authentication method must be RADIUS. To set the method, go to Security > Management Security > Authentication List and select RADIUS as method 1 for defaultList. For more information, see "Authentication List Configuration" on page 6-236. • Disable - The switch does not check for 802.1X authentication before allowing traffic on any ports, even if the ports are configured to allow only authenticated users. Default value. 2. Use VLAN Assignment Mode to select one of options for VLAN Assignment mode: enable and disable. The default value is disable. 254