Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 275

Web Management User Guide Field Multicast Storm Recovery Level Unicast Storm Recovery Mode Unicast Storm Recovery Level Type Unicast Storm Recovery Level Description Specify the threshold at which storm control activates. The factory default is 5 percent of port speed for pps type. Enable or disable this option by selecting the corresponding line on the pull-down entry field. When you specify Enable for Unicast Storm Recovery and the unicast traffic on the specified Ethernet port exceeds the configured threshold, the switch blocks (discards) the unicast traffic. The factory default is disabled. Specify the Unicast Storm Recovery Level as a percentage of link speed or as packages per second. Specify the threshold at which storm control activates. The factory default is 5 percent of port speed for pps type. Control To display the page, click the Security  Control tab. The Control folder contains links to the following features: • DHCP Snooping on page 275 • IP Source Guard on page 281 • Dynamic ARP Inspection on page 283 DHCP Snooping The DHCP Snooping folder contains links to the following features: • DHCP Snooping Global Configuration on page 275 • DHCP Snooping Interface Configuration on page 277 • DHCP Snooping Binding Configuration on page 277 • DHCP Snooping Persistent Configuration on page 278 • DHCP Snooping Statistics on page 280 DHCP Snooping Global Configuration To display the DHCP Snooping Global Configuration page, click Security  Control> DHCP Snooping  Global Configuration. 275