Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 200
p to Queue Mapping, Advanced, 1p to, Queue Mapping, Interface, CANCEL, APPLY
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Web Management User Guide 802.1p to Queue Mapping The 802.1p to Queue Mapping page also displays the Current 802.1p Priority Mapping table. To display the 801.p to Queue Mapping page, click QoS CoS Advanced 802.1p to Queue Mapping. To map 802.1p priorities to queues: 1. Use Interface to specify CoS configuration settings based per-interface or specify all CoS configurable interfaces. 2. Specify which internal traffic class to map the corresponding 802.1p value. The queue number depends on the specific hardware. The 802.1p Priority row contains traffic class selectors for each of the eight 802.1p priorities to be mapped. The priority goes from low (0) to high (3). For example, traffic with a priority of 0 is for most data traffic and is sent using "best effort." Traffic with a higher priority, such as 3, might be time-sensitive traffic, such as voice or video. The values in each drop down menu represent the traffic class. The traffic class is the hardware queue for a port. Higher traffic class values indicate a higher queue position. Before traffic in a lower queue is sent, it must wait for traffic in higher queues to be sent. 3. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 4. If you make changes to the page, click APPLY to apply the changes to the system. 200