Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 219
IP DSCP, IP Precedence, Committed Rate, Committed Burst Size, Conform Action, Violate Action
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
Web Management User Guide match criterion for one of the following fields (provided the field does not conflict with the classifier of the policy instance itself): • CoS • IP DSCP • IP Precedence • Committed Rate - This value is specified in the range 1 to 4294967295 kilobits-per-second (Kbps). • Committed Burst Size - This value is specified in the range 1 to 128 KBytes. The committed burst size is used to determine the amount of conforming traffic allowed. • Conform Action - This lists the actions to be taken on conforming packets per the policing metrics, from which one can be selected. The default is 'send'. • Violate Action - This lists the actions to be taken on violating packets per the policing metrics, from which one can be selected. The default is 'send'. • For each of the above Action Selectors one of the following actions can be taken: • Drop - These packets are immediately dropped. • Mark IP DSCP - These packets are marked by DiffServ with the specified DSCP value before being presented to the system forwarding element. This selection requires that the DSCP value field be set. • Mark CoS - These packets are marked by DiffServ with the specified CoS value before being presented to the system forwarding element. This selection requires that the Mark CoS value field be set. • Send - These packets are presented unmodified by DiffServ to the system forwarding element. • Mark IP Precedence - These packets are marked by DiffServ with the specified IP Precedence value before being presented to the system forwarding element. This selection requires that the Mark IP Precedence value field be set. 5. Click CANCEL to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 6. If you change any of the settings on the page, click APPLY to send the updated configuration to the switch. Configuration changes take effect immediately. Field Policy Name Policy Type Member Class Name Description Displays name of the DiffServ policy. Displays type of the policy as In Displays name of each class instance within the policy. 219