Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 268

Web Management User Guide 2. Select the check box next to the port or LAG to configure. Select multiple check boxes to apply the same setting to all selected interfaces. Select the check box in the heading row to apply the same settings to all interfaces. 3. Specify the following settings: • Security Mode - Enables or disables the Port Security feature for the selected interface. • Max Allowed Dynamically Learned MAC - Sets the maximum number of dynamically learned MAC addresses on the selected interface. • Max Allowed Statically Locked MAC - Sets the maximum number of statically locked MAC addresses on the selected interface. • Violation Traps - Enables or disables the sending of new violation traps designating when a packet with a disallowed MAC address is received on a locked port. Dynamic MAC Address Use the Dynamic MAC Address page to convert a dynamically learned MAC address to a statically locked address. To display the Dynamic MAC Address page, click Security  Traffic Control> Port Security  Dynamic MAC Address. To convert learned MAC addresses: 1. Port List - Select the physical interface for which you want to display data. 2. Use Convert Dynamic Address to Static to convert a dynamically learned MAC address to a statically locked address. The Dynamic MAC address entries are converted to Static MAC address entries in a numerically ascending order until the Static limit is reached. 3. Click REFRESH to refresh the web page to show the latest MAC address learned on a specific port. The Dynamic MAC Address Table shows the MAC addresses and their associated VLANs learned on the selected port. Use the Port List menu to select the interface for which you want to display data. 268