Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P User Manual - Page 63

Web Management User Guide Field Status Fault Status PoE PD Port Status Description The status is the operational status of the port PD detection. • Disabled - indicates no power being delivered. • DeliveringPower - indicates power is being drawn by device. • Fault - indicates a problem with the port. • Test - indicates port is in test mode. • otherFault - indicates port is idle due to error condition. • Searching - indicates port is not in one of the above states. Describes the error description when the PSE port is in fault status. No Error indicates that the PSE port is not in any error state. MPS Absent indicates that the PSE port has detected an absence of main power supply. Short indicates that the PSE port has detected a short circuit condition. Overload indicates that the pd connected to the PSE port had tried to provide more power than it is permissible by the hardware. Power Denied indicates that the PSE port has been denied power because of shortage of power or due to administrative action. Note: The PoE PD Port Status is only available on the GSM5212P switch. To display the Advanced PoE PD Port Status page, click System > Services > PoE > Advanced > PoE PD Port Status. A screen similar to the following displays. 63