Samsung SGH-T879 User Manual Ver.lg2_f2 (English(north America)) - Page 236

To pair your device with another Bluetooth device: 1. Verify Bluetooth is active. 2. From the Bluetooth settings page, tap the Visibility field (shown by the device name). Your device must be visible to successfully pair with an external device. This is shown by a green check mark. 3. Tap Scan for devices. Your device displays a list of discovered in-range Bluetooth devices. 4. Tap a device from the list to initiate pairing. 5. Enter the passkey or PIN code, if needed, and tap OK. 6. The external device must accept the connection and enter your device's PIN code. Once successfully paired to an external device, displays in the Status area. Note: Due to different specifications and features of other Bluetooth-compatible devices, display and operations may be different, and functions such as transfer or exchange may not be possible with all Bluetoothcompatible devices. Disconnecting a Paired Bluetooth Device Disconnecting a paired device breaks the connection between the device and your phone, but retains the knowledge of the pairing. At a later point when you wish to reconnect the device, there is no need to setup the connection information again. 1. Verify your Bluetooth is active. 2. From the Bluetooth settings page, tap the previously paired device (from the bottom of the page). 3. Tap OK to confirm disconnection. - or - Tap Cancel to confirm current connection. Note: Disconnections are manually done but often occur automatically if the paired device goes out of range of your phone or it is powered off. 231