Canon PC300 Instruction Manual - Page 159
Copying Job Buttons, Shared Job Button to the My Job Button.
View all Canon PC300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Document orientation Rotates the scanned image to the specified angle. Hint When [Auto] is selected, the scanner detects text orientation within the document and rotates the image so that the orientation of the text is correct. IMPORTANT The scanning speed may be reduced when [Auto] is selected. Deskew Detects when a document has been fed askew from the scanned image, and then straightens the image. • Prefer Quality Image processing is performed to minimize the loss of quality of an image that has deteriorated as result of deskewing. • Prefer Speed The image deteriorates slightly as a result of deskewing. IMPORTANT If you select [Prefer Quality], the scanning speed is reduced. If you are scanning a large number of pages, select [Prefer Speed] to prevent a decrease in scanning speed. Bleed-through reduction Eliminates bleed-through images, in which images on the reverse side of a scanned document appear on the scanned page, such as when scanning thin documents with text or images on both sides. IMPORTANT The bleed-through reduction setting is disabled when the scanning mode is set to [Text enhance]. Hint When using bleed-through reduction, adjust the bleed-through reduction level to match the type of document. Chapter 8 Web Menu (User Mode) Color drop-out The color drop-out function has a "drop-out" effect that leaves out a specified color (red, blue, or green) while scanning, and a "color enhancement" effect that emphasizes a specified color. IMPORTANT The color drop-out setting is disabled when the scanning mode is set to [Color]. Hint The OCR recognition rate is sometimes improved by deleting colored ruled lines and other objects with the color drop-out function. ❏ Copying Job Buttons You can copy the settings of a job button and register it as a new job button. As an example, this section describes how to copy from the Shared Job Button to the My Job Button. Hint Use this function when you want to copy a job button between the Shared Job Button and My Job Button or register it as a different job button after changing some of the settings. 1. Select Shared Job Button for the [Job Button Type]. 2. Select the job button you want to copy, and click [Copy]. 8-22