Canon PC300 Instruction Manual - Page 42
Configuring Administrator Settings, Logging In to the Administrator Settings
View all Canon PC300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Chapter 3 ScanFront Setup 4. Configuring Administrator Settings Enter the administrator password and log in to configure administrator settings. ❏ Logging In to the Administrator Settings Follow the procedure below to configure the [Device name] and [IP address] needed to connect the scanner to a network. 1. Press [Administrator setting]. 3. Select the setting item to configure. The [Administrator Password] input box appears. 2. Press [OK] to display the [Administrator setting] screen. No administrator password is set by default. 3-8
3-8
Chapter 3
ScanFront Setup
4.
Configuring Administrator Settings
Enter the administrator password and log in to configure administrator settings.
❏
Logging In to the Administrator Settings
Follow the procedure below to configure the [Device
name] and [IP address] needed to connect the scanner to a
network.
1.
Press [Administrator setting].
The [Administrator Password] input box appears.
2.
Press [OK] to display the [Administrator setting]
screen.
No administrator password is set by default.
3.
Select the setting item to configure.