HP LaserJet M9040/M9050 Service Manual - Page 26

Output devices This product comes with a 3000-sheet stacker, a 3000-sheet stapler/stacker, a multifunction finisher, or an 8-bin mailbox. 3,000-sheet stacker ● Stacks up to 3,000 sheets of A4- or letter-size paper ● Stacks up to 1,500 sheets of A3- or ledger-size paper ● Can offset jobs, or offset the first page of jobs The lower bin (face-down bin) is the default bin for all output jobs. 3,000-sheet stapler/stacker Paper handling features ● Stacks up to 3,000 sheets A4- or letter-size paper ● Stacks up to 1,500 sheets of A3- or ledger-size paper ● Can offset jobs, or offset the first page of jobs The upper bin (face-up bin) is the default bin for all output jobs. Stapling information The 3,000-sheet stapler/stacker can staple 2 to 50 pages of 75 g/m2 (20 lb) paper or equivalent 5 mm (0.2 in). The pages must be 64 to 199 g/m2 (17 to 53 lb) of all sizes that the device supports. ● Heavier media might have a stapling limit of fewer than 50 pages. ● If the job is only one sheet, or, if it is more than 50 sheets, it is printed and not stapled. You can usually select the stapler in the software program or print driver, although some options might be available only in the print driver. See the product user guide for more information. If the stapler cannot be selected in the program or printer driver, it can be selected through the product control panel. See the product user guide for instructions. Multifunction finisher Paper handling features ● Stacks up to 1,000 sheets of A4 and letter paper or up to 500 sheets of A3 and 11 x 17 paper ● Stacks up to 40 booklets of 5 sheets of A3 and ledger paper ● Can offset jobs ● Staples up to 50 sheets of paper per document of A4 and letter paper ● Staples up to 25 sheets of paper per document A3 and ledger paper 8 Chapter 1 Product basics ENWW