HP LaserJet M9040/M9050 Service Manual - Page 79

Select the output bin The product has at least two output bin locations: one on the ADF (callout 1) and one or more on the output device. Figure 3-22 Output bins For best results, select an output location using the software program or print driver. Stacker or stapler/stacker output bins The 3,000-sheet stacker or the 3,000-sheet stapler/stacker have two output bins: the upper bin (callout 2) face up and the lower bin (callout 3) face down. The upper bin holds up to 100 sheets of paper. It includes a sensor that causes the product to stop when it is full. When the bin is emptied, the product resumes. The lower bin is the default bin. It holds up to 3,000 sheets of paper and can stack or staple jobs. 8-bin mailbox output bins The 8-bin mailbox has one face-up upper bin (callout 4) and eight face-down bins (callout 5). The upper bin holds up to 125 sheets of paper, and each face down bin holds up to 250 sheets of paper. The network administrator can assign the eight face down bins to individual users or workgroups. Multifunction finisher output bins The multifunction finisher includes an upper bin (callout 6) and the lower booklet bin (callout 7). The upper bin is the default bin. It can hold up to 1,000 sheets of paper and can offset each job as it is stacks. It can deliver unstapled jobs face up or face down. It also can staple documents up to 50 sheets each. The lower bin is the booklet bin. It can fold and saddle stitch booklets of up to 10 sheets of paper. ENWW Select the output bin 61