HP LaserJet M9040/M9050 Service Manual - Page 63

Table 2-16 Troubleshooting menu (continued) Menu item Submenu item Submenu item Paper Path Test Test Page Source Destination Service Test Duplex Copies Print/Stop Test Scanner Tests Control Panel LEDs Display Buttons Touchscreen Values Description Print All trays Tray 1 Generate a test page for testing the paperhandling features. Define the path for the test in order to test specific paper paths. Specify whether the test page is printed from all trays or from a specific tray. Tray 2 (Additional trays are shown, if applicable.) All bins Stacker Bin Select the output option for the test page. Send the test page to all output bins or only to a specific bin. Standard Output Bin Off (default) On Select whether the duplexer should be included in the test. 1,10,50,100,500 Default=1 Select how many pages should be sent from the specified source as part of the test. Follow the on-screen instructions. Provides a series of prompts that the user can follow to discover if the printer is functioning properly. It also makes sure that paper is not in the paper path. Continuous value from 0 to 60,000 milliseconds. Default: 0 Isolate faults by stopping the product during the print cycle and observing where in the process the image degrades. To run the test, specify a stop time. The next job that is sent to the product stops at the specified time in the process. A service technician can use this menu item to diagnose potential problems with the product scanner. Verify that the components of the control panel are functioning correctly. ENWW Use the Administration menu 45