Kyocera KM-3530 2530/3530/4030 Operation Guide Rev 2C - Page 122
Message, Action
View all Kyocera KM-3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
CHAPTER 8 WHEN A PROBLEM OCCURS Message "Time for maintenance" Action Periodic maintenance is necessary to keep your copier in good condition. Contact your service representative as soon as possible. Page - "Memory full." "Misfeed in xxx." The copier memory is full. Either print out or clear all scanned data. It is not possible to copy or scan another original until one of these two opera- tions is performed. - The copier memory size and the capacity for scanning originals are shown below. Memory 32MB (standard) 32MB (standard) + 32MB (optional) 32MB (standard) + 64MB (optional) 32MB (standard) + 128MB (optional) Total 32MB 64MB 96MB 160MB Scanning capacity* 122 originals 292 originals 462 originals 802 originals *When using the standard original specified by our company (A4 paper, Characters account for 6% of the original). If paper is misfed, the copier will stop and the location of the misfeed will appear on the message display. Remove the misfed paper with the main switch turned ON ( |) by following the appropriate procedure. 8-3 "Misfeed in Doc Proces. Remove original(s)." Originals have not been fed correctly from the Document Processor (op- tional). Remove the originals with the main switch turned ON (|) by follow- ing the appropriate procedure. 8-4 "Duplex tray inoperable, call service." The duplex unit (optional) is out of order and duplex copying is not pos- sible. Contact your service representative immediately. - "Paper capacity exceeded. Remove paper from Job sep." There are 100 sheets of paper stored on the optional job separator. Remove the paper and resume copying. - "Remove paper form inner tray of Finisher." Paper has been misfed inside the document finisher (optional). See the document finisher's operation guide and remove the paper. - "Out of staples. Add staples." There are no staples in the document finisher (optional). See the document finisher's operation guide and replace the staple cartridge. - "Cannot staple this size." Stapling is not possible with small size paper. For details, see the document finisher's operation guide . - "Replace the waste toner box." The waste toner box is filled with waste toner. Replace the waste toner box with a new one. 3-4 "Close Document processor cover." The document processor original cover of the optional document proces- sor is open. Close the cover securely. - 8-2