Kyocera KM-3530 2530/3530/4030 Operation Guide Rev 2C - Page 129
Misfeed in Document Processor optional JAM 70 to 73, Misfeed in built-in finisher optional JAM 80
View all Kyocera KM-3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
3 If the misfed original is found, remove it. * If paper is torn during removal, be sure to remove all loose scraps from inside the copier, or they could cause misfeed later. CHAPTER 8 WHEN A PROBLEM OCCURS Inch specifications Metric specifications 4 Raise the reversing unit. 5 If the misfed original is found, remove it. * If paper is torn during removal, be sure to remove all loose scraps from inside the copier, or they could cause misfeed later. 1 Open the Document Processor original cover. 2 Remove the misfed original. * If paper is torn during removal, be sure to remove all loose scraps from inside the copier, or they could cause misfeed later. 6 Turn the left knob to eject and remove the misfed original. 3 Close the Document Processor original cover. 4 Misfeed in built-in finisher (optional) (JAM 80 to 84) If the message below appears, a misfeed has occurred in the built-in finisher. Remove the misfed paper using the procedure below. Inch specifications 7 Close the Document Processor original cover. 3 Misfeed in Document Processor (optional) (JAM 70 to 73) If the message below appears, a misfeed has occurred in the Document Processor. Remove the misfed original using the procedure given below. 8-9