Kyocera KM-3530 Fax System (F) Operation Guide Rev1 - Page 64
Other Features of this Fax
View all Kyocera KM-3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Section 4 Other Features of this Fax Section 4 Other Features of this Fax Auto FAX/TEL Switching This reception mode is convenient for using a separately purchased telephone together with this fax on a single telephone line. If an incoming call is from a fax machine, fax reception will start automatically. If the call is from a telephone, the fax will ring to let you know that you should answer. * Auto FAX/TEL switching is only possible if a separately purchased telephone is connected to this fax machine. * Even if you do not answer the telephone, the calling party will incur telephone charges after the phone rings a predetermined number of times. G Preparation * Refer to "Selecting the Automatic Reception Mode" on page 6-5, and select "Auto Fax/Tel. SW". * Make sure that "Auto RX" is displayed on the basic fax screen. If it is not, touch the reception mode select key and then touch the "Auto RX" key. > If the call is from a telephone... 1 The fax will ring to let you know that you should answer. Pick up the telephone receiver within 30 seconds after the ringing starts. * If the telephone receiver is not picked up within 30 seconds, the fax machine will switch to fax reception. (Inch) (Metric) 1. When a call comes in, the telephone will ring. * The telephone will ring only once in the metric version models. In the inch version models, you can set the number of times the telephone will ring. (Refer to "Setting the Number of Rings (Auto Fax Reception)" on page 6-3.) 2 Speak with the other party. * At the end of the conversation, fax reception can be initiated manually. (Refer to "Manual Fax Reception" on page 2-15.) > If the call is from a fax... Fax reception will start automatically. 2. Answering the call... 4-1