Kyocera KM-3530 Fax System (F) Operation Guide Rev1 - Page 91

Section 4 Other Features of this Fax (3) Using a Program Key 1. If the operation involves the transmission of documents, set the documents you want to transmit. If it involves a polling reception, go directly to step 5. (4) Printing Out a Program Dial List Print out this list in order to check the content of program keys currently registered in this fax. * If there are no program keys registered in this fax, a Program Dial List will not be printed out. * If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 2. If you want to change the transmission conditions, such as the resolution and contrast, touch the "TX setting" key. If you do NOT want to change the current conditions, go directly to step 5. 1. Touch the "Print Report" key. The Report Select screen will appear. (Inch) 3. Touch the key that corresponds to the desired item and change the information as desired. (To change each transmission condition, refer to pages 1-16 and 1-17.) (Metric) 4. Once you are finished changing transmission conditions, touch the "One touch destinat." key. 5. Touch the program key under which the desired program is registered. (Inch) 2. Touch the "Program dial list" key. (Inch) (Metric) (Metric) 6. Press the Start key. The transmission or reception operation, as appropriate, will begin automatically. 3. To print out a Program Dial List, touch the "Yes" key. A Program Dial List will be printed out. 4-28