Kyocera KM-3530 Fax System (F) Operation Guide Rev1 - Page 88

(3) Dialing * You CANNOT use group dial keys in combination with chain dial keys. * You can use group dial keys not only for standard transmission, but also for such operations as Broadcast Transmission and Polling Reception. 1. If the operation involves the transmission of documents, set the documents you want to transmit. Section 4 Other Features of this Fax (4) Printing Out a Group Dial List Print out this list in order to check the contents of group dial keys currently registered in this fax, such as the registered fax numbers and the group name. * If there are no group dial keys registered in this fax, a Group Dial List will not be printed out. * If you want to cancel the procedure part way through, press the Reset key. The touch panel will return to the initial mode settings. 1. Touch the "Print Report" key. The Report Select screen will appear. (Inch) 2. If you want to change the transmission conditions, such as the resolution and contrast, touch the "TX setting" key. If you do NOT want to change the current conditions, go directly to step 5. 3. Touch the key that corresponds to the desired item and change the information as desired. (To change each transmission condition, refer to pages 1-16 and 1-17.) 4. Once you are finished changing transmission conditions, touch the "One touch destinat." key. (Metric) 2. Touch the "Group dial List" key. (Inch) 5. Touch the group dial key under which the desired fax numbers are registered. (Inch) (Metric) (Metric) 6. Press the Start key. The transmission operation will begin automatically. 3. To print out a Group Dial List, touch the "Yes" key. A Group Dial List will be printed out. 4-25