Kyocera TASKalfa 4500i Fax System (V) Operation Guide - Page 47

FAX Operation (Basic) reentering the fax number. To delete the number entirely, press the Clear key on the operation panel. When [Add to Addr Book] is displayed, you can register entered contents to the Address Book. When [New Destination Entry] is set to [Prohibit], the numeric keys cannot be used to enter a fax number. For details, refer to Prohibiting entry of fax numbers with the numeric keys on page 4-59. 3 [Pause] Pressing this key adds about three seconds of waiting time during dialing. For example, when dialing the receiving system on an external line, you can use this method to insert a pause before resuming dialing after you dial a specific number. [On Hook] Press this key to connect to the telephone line. When the FAX number has been entered, the machine starts dialing to the receiving system. After pressing this key, you can dial the number of the receiving system using the numeric keys. For details, refer to Manual Send on page 4-13. Dialing methods without using the numeric keys • Using the Address Book (Refer to page 3-16.) • Using One-touch keys (Refer to page 3-21.) • Using the Speed Dial key (Refer to page 3-22.) • Manual Redial (recall) (Refer to page 3-23.) Detailed Settings Detailed settings allow you to use sub-address, select transmission start speed, ECM, and encryption. These settings must be made in accordance with those of the destination. In addition, you can change the FAX density, image quality, resolution and select the size of originals. FAX No. Entry - Detail Destination Press [Detail]. Press [Change] in each setting, change the setting, and press [OK]. When you have finished changing settings, press [OK] and then [Close]. Sub Address : Transmission Start Speed : 33600bps ECM : On Encrypted Transmission : Off Status Cancel Change Change Change Change OK 10/10/2010 3-7