Kyocera TASKalfa 4500i Fax System (V) Operation Guide - Page 96
Cancelling the Setting of RX/Forward Requirements, Forwarding Detail Settings, Activating Time Setting
View all Kyocera TASKalfa 4500i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
FAX Operation (Advanced) Cancelling the Setting of RX/Forward Requirements To cancel the memory forwarding, follow the steps below. 1 Press the System Menu key. 2 Press [FAX] and then [Next] of RX/Forward Requirements. 3 Press [Off] and then [OK]. Forwarding Detail Settings With the forwarding settings, you can change the following detail settings. Activating Time Setting Specify the times when the preset requirements are activated and deactivated. 1 Follow steps 1 to 3 of Using Requirements for All Receptions on page 4-20. Follow steps 1 to 3 of Using Rule for Specific RX on page 4-22. 2 Select the requirement and press [Detail]. 3 Press [Change] of Activating Time. Requirement: - Activating Time Specify the time for activating the requirements. Print or forward the faxes received during the preset time according to the requirements. All Day Preset Time Start : End : 4 Select [All Day] or [Preset Time]. To forward received originals all day, select [All Day], press [OK] and then go to step 5. To set the forwarding time, select [Preset Time] and go to the next step. 5 Press [+]/[-] to enter Start Time and End Time, and then press [OK]. Cancel OK NOTE: Enter the time on the 24 hours system. Status 10/10/2010 10:10 Priority Setting Set the priority of a registered forwarding requirement. 1 Follow steps 1 to 3 of Using Rule for Specific RX on page 4-22. 2 Select the requirement and press [Detail]. 3 Press [Change] of Priority. 4 Press [+] or [-] or use the numeric keys to enter the priority. 5 Press [OK]. 4-28