Lexmark C540 Service Manual - Page 165
Exit deflector and bin full sensor flag removal, on Bin full sensor removal
View all Lexmark C540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
5025-2xx, 4xx 7. Remove the exit deflector and bin full sensor flag. See "Exit deflector and bin full sensor flag removal" on page 4-24. 8. Remove the bin full sensor. See "Bin full sensor removal" on page 4-18. 9. Unhook the springs (D) from both sides of the fuser. 10. Rotate the top of the fuser toward the front, slide it to the left to align the fuser side frames with the flat areas of the shaft (E), and lift to remove the fuser. Warning: Be careful to not interfere with or damage the fuser exit sensor to the left of the fuser when rotating the fuser. Repair information 4-27
Repair information
4-27
5025-2xx, 4xx
7.
Remove the exit deflector and bin full sensor flag. See
“Exit deflector and bin full sensor flag removal”
on page 4-24
.
8.
Remove the bin full sensor. See
“Bin full sensor removal” on page 4-18
.
9.
Unhook the springs (D) from both sides of the fuser.
10.
Rotate the top of the fuser toward the front, slide it to the left to align the fuser side frames with the flat
areas of the shaft (E), and lift to remove the fuser.
Warning:
Be careful to not interfere with or damage the fuser exit sensor to the left of the fuser when
rotating the fuser.