Lexmark C540 Service Manual - Page 193
Toner meter cycle (TMC) card removal, Toner meter cycle card assembly
View all Lexmark C540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
5025-2xx, 4xx Toner meter cycle (TMC) card removal See "Toner meter cycle card assembly" on page 7-7 for the part number. 1. Remove the rear shield. See "Rear shield removal" on page 4-11. 2. Remove the right cover assembly. See "Right cover assembly removal" on page 4-10. 3. Remove the waste toner bottle. See "Waste toner bottle removal" on page 4-60. 4. Remove the imaging unit (IU). See "Imaging unit (IU) removal" on page 4-35. 5. Disconnect the TMC cable from JCTM1 connector (A), and push the toner meter cycle card cable through the frame opening. Note: Observe the routing for reinstallation. 6. Remove the two plastic screws (B), the two metal screws (C), and remove the card. Repair information 4-55
Repair information
4-55
5025-2xx, 4xx
Toner meter cycle (TMC) card removal
See
“Toner meter cycle card assembly” on page 7-7
for the part number.
1.
Remove the rear shield. See
“Rear shield removal” on page 4-11
.
2.
Remove the right cover assembly. See
“Right cover assembly removal” on page 4-10
.
3.
Remove the waste toner bottle. See
“Waste toner bottle removal” on page 4-60
.
4.
Remove the imaging unit (IU). See
“Imaging unit (IU) removal” on page 4-35
.
5.
Disconnect the TMC cable from JCTM1 connector (A), and push the toner meter cycle card cable through
the frame opening.
Note:
Observe the routing for reinstallation.
6.
Remove the two plastic screws (B), the two metal screws (C), and remove the card.