Lexmark C540 Service Manual - Page 39
Error codes and messages, User status and customer attendance messages - toner refill
View all Lexmark C540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
5025-2xx, 4xx Error codes and messages User status and customer attendance messages User primary message Calibrating Close Door Check Config ID Check Model Name Check Serial Num Defragmenting Flash DO NOT POWER OFF Formatting Flash DO NOT POWER OFF Insert Tray Install Tray or Cancel job Invalid Engine Code Invalid Network Code Load Load Load Load Explanation The printer is performing a color adjustment. Message clears when front cover, right cover, and toner door are closed or securely fastened. The printer configuration ID is invalid. Message clears when a valid model name is set. Message clears when a valid serial number is set. The printer is performing the defragmentation operation of flash memory. Wait for the message to clear. Warning: Do not turn the printer off while this message appears on the display. Wait for the message to appear. Warning: Do not turn the printer off while this message appears on the display. This message is displayed when the printer requests the user to insert tray x before it can continue printing the job. The printer needs to pick media from the missing tray or the trays below it. Tray x=Tray 1 or Tray 2 Note: This message displays when refilling the trays during a job. Before filling a tray, take the printer offline by pressing Stop ( ), and wait for pages to stop feeding into the output bin. The following actions can be taken: • Insert the requested tray. • Press Stop ( ), and then press Select ( ) to cancel printing. Printer detects that tray is missing, where x is 1 or 2. This message appears if the job was begun, but the paper has not yet been retrieved. The tray is no longer detected. Replace the indicated tray. The engine code is invalid. The network code is invalid. Printer does not detect media meeting the description in , where is Tray 1, Tray 2, or multipurpose feeder. • Load the input source with the correct type and size media. • Press Stop ( ), and then press Select ( ) to cancel printing. Printer does not detect media meeting the description in , where is Tray 1, Tray 2, or multipurpose feeder. • Load the input source with the correct type and size media. • Press Stop ( ), and then press Select ( ) to cancel printing. Printer does not detect media meeting the size requested in the source indicated. • Load the input source with the correct type and size media. • Press Stop ( ), and then press Select ( ) to cancel printing. Printer does not detect media meeting the size or type requested in the source indicated. • Load the input source with the correct type and size media. • Press Stop ( ), and then press Select ( ) to cancel printing. Diagnostic information 2-5