Pioneer PRO 111FD Owner's Manual - Page 11
Operating Range for the Remote Control - elite
UPC - 012562887111
View all Pioneer PRO 111FD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Introduction to the ELITE Series Flat Panel TVs 01 Operating Range for the Remote Control To control the flat panel TV, point the remote towards the sensor on the panel's bottom right corner. For easy operation, keep the distance between the remote control and the sensor less than 7 m (23 feet) and at an angle of less than 30 degrees. 7 m 30º (23 feet) 30º Sensor The remote control may not work properly if the sensor is in direct sunlight or very bright lighting. If your viewing room is naturally bright, change the position of the panel or physically use the remote control closer to the panel's sensor. Note: If the remote control is left sitting in direct sunlight or under a very strong light, the case could warp or deform. 11 En
11
En
01
Introduction to the ELITE Series Flat Panel TVs
Operating Range for the Remote Control
To control the flat panel TV, point the remote towards the sensor on the panel’s bottom right corner. For easy
operation, keep the distance between the remote control and the sensor less than 7 m (23 feet) and at an angle
of less than 30 degrees.
The remote control may not work properly if the sensor is in direct sunlight or very bright lighting. If your viewing
room is naturally bright, change the position of the panel or physically use the remote control closer to the panel’s
sensor.
Note: If the remote control is left sitting in direct sunlight or under a very strong light, the case could warp or
deform.
30º
Sensor
30º
7 m
(23 feet)