Pioneer PRO 111FD Owner's Manual - Page 29
Connect cable or Satellite using STB Set Top Box - box picture
UPC - 012562887111
View all Pioneer PRO 111FD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Install Your Flat Panel TV 02 2.6 Connect to Broadcast TV & Other Devices (DVR, Receiver, BDR, etc.) The type of equipment attached to your flat panel TV determines which panel ports are used. The following sections explain how to connect broadcast TV and playback equipment such as a DVD player, Surround Sound system, video recorder, etc. to the panel. If your equipment is not listed, please refer to the operating instructions that came with the device(s) for connection assistance. 2.6.1 Add Analog (conventional) and Digital TV Channels Whether a TV station broadcasts in Analog or Digital, your flat panel TV shows the programs as long as the panel is programmed to accept the signal. To program your panel for broadcast TV, select terminal ANT. The ANT terminal accepts both analog and digital T T W W broadcasts. Connect a VHF/UHF antenna and/or cable TV to the panel's rear ANT terminal, then press TV/DTV on the remote control to toggle between analog and digital broadcasts. When watching analog TV channels, you can Rear view also use an outdoor antenna for the clearest analog picture. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the panel's antenna terminal on the back. In order to watch both analog and digital broadcasts through your terrestrial antenna or cable connection, you must first connect 2.6.2 Connect Your Other Pioneer Equipment the antenna cable to a splitter. This section provides cabling information for your other Pioneer equipment when combined with the panel. Each diagram can also be used as a reference tool for non-Pioneer devices but port locations may differ or be unavailable. Connect cable or Satellite using STB (Set Top Box): T T W W Satellite antenna Rear view SAT IN Cable STB/Satellite STB HDMI OUT AUDIO OUT COMPONENT VIDEO OUTPUT Y PB PR IN OUT Cable STB/Satellite STB HDMI OUT AUDIO OUT COMPONENT VIDEO OUTPUT Y PB PR IN OUT When using a cable STB or Satellite STB, plug in to the antenna/cable TV wall outlet using the STB cable provided with your STB. If your STB has an HDMI terminal, use any of INPUT 4 through INPUT 6 (HDMI terminal) on the rear or INPUT 7 (HDMI terminal) on the side of the flat panel TV instead of making video connections. If you connect an antenna cable directly to TV, you must first connect the cable to a splitter. For details, refer to the operating manual that came with the STB. 29 En