Pioneer PRO 111FD Owner's Manual - Page 21

Install Your Flat Panel TV 02 3 ) Hang the speaker bracket on the screw at the top by passing the wide part over it and lowering into the slot; screw in the lower screw temporarily. After passing the wide part of the hole of the speaker bracket (top) over the screw, lower the speaker onto it. (PRO-151FD) (PRO-111FD) After passing the wide part of the hole over the screw, lower the speaker. After passing the wide part of the hole over the screw, lower the speaker. Tighten with the provided screw the bottom speaker bracket to the flat panel TV temporarily (one place bottom). Tighten with the provided screw the bottom speaker bracket to the flat panel TV temporarily (one place bottom). 4 ) Adjust the position of the speaker then tighten the upper and lower screws firmly. 5 ) Tighten the two screws at the top and bottom for each speaker. (PRO-151FD) (PRO-111FD) 6 ) Pass the supplied speaker cable between the speaker and the panel (below the speaker bracket) from below. 7 ) Connect the speaker cables to the speaker. Refer to " 2.2.2 Connect the Speaker Cables." 21 En