Ricoh AC205 User's Guide - Page 249
Setting Up a Network-Connected Machine, Configuring Network Parameters on the Control Panel
View all Ricoh AC205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
9 In the Enter a port name field, enter the shared name. 10 Click OK and click Close. 11 For Windows NT 4.0, click OK. For Windows 2000/XP, click Apply and click OK. Setting Up a Network-Connected Machine You have to set up the network protocols on the machine to use it as your network printer. You can configure the basic network parameters through the machine's control panel. Use the machine's control panel to do the following: • Print a Network Configuration Page • Configure TCP/IP Configuring Network Parameters on the Control Panel Supported Operating Systems NOTES: • The operating systems supported by the network card may be different from the operating systems supported by the machine. The following table shows the network environments supported by the machine. • Printer driver does not support Windows 95. Item Network Interface Requirements 10/100 Base-TX Network Operating System Windows 98/Me/NT 4.0/2000/XP Network Protocols TCP/IP on Windows Dynamic Addressing Server DHCP, BOOTP • TCP/IP: Transmission Control Protocol/Internet Protocol A.4 USING YOUR MACHINE ON A NETWORK