Ricoh AC205 User's Guide - Page 72
To Use Set IP, CARD TEST To Print the NETWORK PRINTER CARD TEST
View all Ricoh AC205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
6 When the installation is completed, click Finish. To Use Set IP 1 From the Start menu, select Type 103 in Programs, and click Set IP. 2 2 Click to find printer on the local network, or click and type the printer's MAC address. NOTE: To configure the MAC address, see the NETWORK PRINTER CARD TEST PAGE. To Print the NETWORK PRINTER CARD TEST PAGE, refer to "Printing a Network Configuration Page" on page A.5. 3 Type IP address, Subnet Mask and Default Gateway, and then click [Config]. 4 If it is successfully is completed, the printer prints NETWORK PRINTER CARD TEST PAGE. GETTING STARTED 2.47
2
G
ETTING
S
TARTED
2.47
6
When the installation is completed, click
Finish
.
To Use Set IP
1
From the
Start
menu, select
Type 103
in Programs, and
click
Set IP
.
2
Click
to find printer on the local network, or click
and type the printer’s MAC address.
N
OTE
: To configure the MAC address, see the NETWORK PRINTER
CARD TEST PAGE. To Print the NETWORK PRINTER CARD TEST
PAGE, refer to “Printing a Network Configuration Page” on
page A.5.
3
Type IP address, Subnet Mask and Default Gateway, and
then click
[Config]
.
4
If it is successfully is completed, the printer prints
NETWORK PRINTER CARD TEST PAGE.