Ricoh AC205 User's Guide - Page 251
Configuring TCP/IP, Before configuring the TCP/IP, you need to set network, protocol to TCP/IP.
View all Ricoh AC205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 251 highlights
6 Press Enter to save the selection. 7 Press Clear/Stop to return to Standby mode. Configuring TCP/IP Your machine can be set up with a variety of TCP/IP networks information, such as an IP address, a Subnet Mask, and a Gatway. There are several ways in which your machine can be assigned a TCP/IP address, depending on your network. • Static Addressing: A TCP/IP address is assigned manually by the system administrator. • Dynamic Addressing BOOTP/DHCP (default): A TCP/IP address is assigned automatically by the server. NOTE: Before configuring the TCP/IP, you need to set network protocol to TCP/IP. Static Addressing To enter the TCP/IP address from your machine's control panel, take the following steps: 1 Press Menu until you see "Network Setup" on the top line of the display. 2 Press the scroll button ( or ) until "Config Network" displays on the bottom line. 3 Press Enter to access the menu. The first available menu item, "TCP/IP," appears on the bottom line. 4 Press Enter. The first available menu item, "Manual," appears on the bottom line. 5 Press Enter. The first available menu item, "IP Address," displays on the bottom line. 6 Press Enter to access the IP Address menu. A.6 USING YOUR MACHINE ON A NETWORK