Brother International PR1050X Operation Manual - Page 102

Touch the keys to adjust the pattern to the b desired angle. Each touch of a key rotates the pattern. 1 Example: Original angle Rotates 90 degrees to the right Rotates 10 degrees to the right Rotates 1 degree to the right 1 Shows the angle of the pattern after a key is touched to change it. The pattern can also be rotated by holding down and dragging a red point around the pattern. Rotates 0.1 degree to the right Rotates 90 degrees to the left Rotates 10 degrees to the left Rotates 1 degree to the left Rotates 0.1 degree to the left Moves the pattern in the direction of the arrow on the key. Moves the frame by 0.1 mm. Moves the frame by 0.5 mm. Moves at maximum speed when a key is held down. Touch this key to return the pattern to its original angle. Touch this key to close this screen. • To return the pattern to its original angle, touch . If necessary, touch the arrow keys to adjust c the position of the pattern. For more details, refer to page 98. If necessary, touch and then touch d to check the embroidering area. For more details, refer to page 54. After making the desired changes, touch e . The embroidering settings screen appears again. 100