Brother International PR1050X Operation Manual - Page 108
Enlarging the camera image
![]() |
View all Brother International PR1050X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Touch to display the needle drop point. i • Touch to change the brightness of the camera image. The embroidering position can more easily be checked by making the image darker ( ) on lighter fabrics or lighter ( ) on darker fabrics. Touch k to return to the previous screen. Touch . l Touch , and then press the start/stop m button to start embroidering. 1 ■ Enlarging the camera image 2 3 Touch . 4 a 1 Needle drop point 2 Chalk mark on the fabric 3 Each touch of this key changes the brightness of the camera image. 4 Touch to save the camera image on the external device. • Touch to check the embroidering position. Memo • Touch to enlarge the camera view. By enlarging the camera view, you can make a close adjustment for the center point of the pattern moving the embroidery frame little by little. Touch and adjust the orientation of the j pattern until the pattern is parallel with the chalk mark drawn on the fabric. (Refer to "Adjusting the angle" on page 99.) The camera image is displayed enlarged. b • You can change the display settings that is specified in the normal camera image display. 1 2 3 1 Touch to save the camera image on the external device. 2 Touch to specify the needle drop point mark on or off. 3 Each touch of this key changes the brightness of the camera image. • Touch the positioning keys to move the embroidery frame until the pattern in the camera view window is aligned with the chalk mark drawn on the fabric. 106
![](/manual_guide/products/brother-international-pr1050x-operation-manual-4febc6e/108.png)