Brother International PR1050X Operation Manual - Page 197

Touch the positioning keys to move the k embroidery frame until the thread mark on the fabric is aligned on the needle drop point in the camera view window. 1 2 1 Thread mark on the fabric 2 Positioning keys • Touch to check the embroidering position. Memo • Touch to enlarge the camera view. By enlarging the camera view, you can make a close adjustment for the needle drop position moving the embroidery frame little by little. If the pattern position cannot be aligned l using the positioning keys, rehoop the fabric, and then try again to align the position with the positioning keys. SELECTING/EDITING/SAVING PATTERNS Creating a custom thread table You can create a custom thread table containing the thread colors that you most often use. You can select thread colors offered by the machine's extensive list of thread colors from nine different thread brands. You can select any color and move the color to your custom thread table. Note • Some machine models may already have an additional 300 Robison-Anton thread colors contained in the custom thread table. • You have the option to completely clear, or to restore the Custom Thread Table to the original factory setting. Visit our website at " http://support.brother.com " for Custom Thread Table Clear/Restore Program and instructions. Before creating a custom thread table, select a pattern and display the pattern editing screen. (Refer to page 45 and 73.) Touch and then touch . a 5 Note • After you have aligned the position of the combined border pattern, do not rotate the pattern in the embroidering settings screen. If the pattern is rotated in the embroidering settings screen, you cannot sew the pattern properly aligned even if the thread mark and the starting point are aligned in the camera view window. Touch m screen. to return to the previous Remove the thread mark. n Touch . o Touch , and then press the start/stop p button to start embroidering. 195